How To Prep Siding For Painting

Work from the bottom up and thoroughly rinse each section immediately after scrubbing.

How to prep siding for painting. Rinse the siding with clean water from a hose then hand-scrub the siding to remove all dirt grease and chalkiness using a soft-bristled brush sponge or rag. In order to remove the paint by pressure -spraying you need to inundate the base surface with massive amounts of water which is never a good idea especially with wood siding. Gently spray one section of the siding with the garden hose.

The point of pressure washing your house siding prior to painting is to wash it not to strip the paint. Once you have covered the siding with the solution let it sit for about 10 minutes. Point the wand downward when spraying to keep water from.

Wear appropriate clothes and gloves as the paint will likely be difficult to rinse off. Youll also need to seal and prime the wood to provide a surface that. Paint the vinyl siding evenly and wait for the paint to dry before painting another coat.

Use bleach for stuff that is growing green. Before weathered wood can be painted it will require extensive prep work to ensure that the paint stays on for more than just a couple of years. Use a long-handled brush and detergent.

Painter Jim Clark shows how to ready old faded aluminum siding for a fresh coat of paint. Exterior painting can make a drastic improvement in the look of your home. In general be aware of any place that may allow water to intrude under the siding or into the house.

Prepare the Surface With old buildings such as my 130-year-old barn water-blasting the loose paint is not a recommended practice. Painting Wood Siding Photo 1. Prepare the area for painting Wash clean with a mild bleach and water solution If it has been painted previously check for peeling paint and scrape off any loose paint Caulk the siding to wood or other composite trim.