How To Clean Wood Table After Sanding

For an extra-smooth finish sand your newly stained table using fine 420-grit paper and using a hand sander.

How to clean wood table after sanding. Reapply the stain to reach the desired depth of color. Sanding against it might cause irremovable scratches on the surface. In order to remove the last remnants of the old finish then you must use a medium grit sandpaper.

Always see to it that you will be sanding along the wood grain. Clean sanded areas with the bleach solution after sanding and air dry the furniture. While blowing the dust off with compressed air removes the dust it also mixes it into the air so some of it can settle back onto the surface and so you can breath it.

Brushing the dust off the surface of recently sanded wood is the first step to clean wood after sanding. If you plan on using an oil-based stain you must use the oil-based Minwax Pre-Stain Wood Conditioner. The most effective way to clean wood after sanding is to brush all the dust off the wooden surface using a painters dust brush and then wipe the surface with a lint-free rag and mineral spirits.

Then switch to fine sandpaper 200 grit until the entire piece is uniform. By any chance if any oily substance sticks with the wood mineral spirits can help to remove it. Step 2 Mist a lint-free cleaning rag with the spray.

If you seek a perfect finish make sure the tack cloth glides smoothly over the wood as you wipe. Brush the sanded area off with a soft cloth to remove all traces of dirt and grit from the sanding. Let the stain soak into the wood for just a few minutes before wiping it off with a clean towel.

Wipe With Denatured Alcohol Many woodworkers end the wood preparation step with the tack-cloth wipe-down but for the very best results conclude your preparation by wiping down the surfaces with a clean cloth moistened with denatured alcohol. They are very handy if you need to de-grease anything. Even lightly sanding finished wood.