How To Make Your Own Hammer Handle
2 Select the blank you intend to use place it between centers and turn it round.
How to make your own hammer handle. Hammers with Steel HandleComplete hammers have a steel handle with a comfortable rubbergrip. Hang the handle on end of reinforced bracket or hook and let ball hang freely. Build Your Custom Martinez Titanium Hammer.
You can also make your own steel-handle hammers using molds handles and lead hammermetal all sold separately. Tap the nail lightly until the nail has sunk into the wood enough that it can stand on its own. A strong well-built handle is essential to any quality tool.
Away to hold the piece. Choose between M1 M4 and M79 head designs. Grip the hammer near the middle of the handle.
3 Drill the hole for the tool. Alternatively a draw knife or a spoke shave can also be used. For the second handle I chose a belt sander to sand down the roughed out shape to the near finished shape.
Auger out enough wood from the hole in the hammer or axe head and the entire handle will come out. I like to chuck a 516 to 38 diameter twist bit into a drill tighten the tool head in a bench vise whats left of the handle pointing down then drill out as much wood as possible from within the hole in. Place hammer handle on one hook and ball on the other hook.
As the damage is cleared we put aside some logs to make tool handles and other things. Choose stock or custom grip options subject to availability. Place your fingers near the top of the nail when holding it.