Which Scroll Saw Blade To Use

A reciprocating saw blade is only attached on one side.

Which scroll saw blade to use. A good rule of thumb is to use a 5 or 7 scroll saw blade for cutting 1x wood. Place the wood down just a few inches away from the actual blade and always be sure you have both hands on the wood at all times. My rule of thumb is to use a 5 or 7 blade for 34 19mm to 1 25mm-thick medium-hard wood such as cherry walnut or maple.

This makes the blade really versatile. It sounds like a great idea. And you place the new blade direction wise.

The TPI on these blades can vary significantly but they fit most standard scroll saws. Plain-end blades are the generic types. As you master the scroll saw experiment with other types of blades.

Plain-End blades The plain end blades are quite common as they are safer to use. Scroll saws are designed to accept one of two types of blades. You could go up to a 9 for a thicker andor harder wood like cherry walnut or maple or down to 3 for thinnersofter wood pine poplar or cedar.

The blade of the scroll saw is much finer and narrower than a jigsaw blade or a bandsaw blade. Most scroll saws come with foot pedals which allow you to turn it off and on. They create friction and heat the blade.

First place your wood. These are considered to be standard for most scroll. Therefore you dont get the use out of the blades.