What Screws To Use For Metal Framing

Fasten steel tracks to concrete using 1-14 in.

What screws to use for metal framing. Recommended Screws and Length The rule of thumb for most screw applications is the screw enters the second piece of wood to about half the thickness of the wood. As an example if you are attaching a 22 wood balusters to a 24 backer 1-12 actual thickness youd opt for a 2-14 screw. Drywall Screws for Metal Studs If you opt for screws designed specifically for metal studs you will find that they are available with a finer thread than regular drywall screws and come with either a very sharp point or a fluted end much like the end of a drill.

Use a hammer drill fitted with a carbide tipped masonry bit. How much weight can metal studs support. Use self-drilling drywall screws on 12- to 20-gauge studsThese types of screws have a sharper-than-average tips with finer threads to deter stripping in metal plus finer threads grip metal better than standard threads.

Attaching wood or metal to concrete. Hang drywall or sheathing using 1-14 inch 31 cm self-tapping drywall screws. Self tapping drill point is designed for penetration into heavy gauge steel.

They should be spaced every 8 inches 203 cm along edges where two sheets meet on a stud and 12. On page 10 of their Steel Framing Guide they point out that hex- pan- and bugle-head screws should be adequate for most applications. 8 self-drilling tapping screws.

Screws used to attach structural sheathing to light gage framing shall have a minimum head diameter of 0292 inches. The fluted screws bite. Sheathing shall be attached to metal studs with minimum No.

The axial load or load weight limit for metal studs varies widely. Pan Head Self Drilling The Pan Head Self Drilling screw is used for attaching fixtures backup plates and door frames to 14 - 20 gauge steel or any other heavy gauge metal-to-metal applications. Fine drywall screws feature smaller heads and are used to secure drywall to metal studs.