Preparing Exterior Wood Windows For Painting

Wood having a moisture content no more than 13MC.

Preparing exterior wood windows for painting. Just about homeowners primary consideration of exteriors proper preparation for painting trim is caulk and sealants. If the blisters go right down to wood level its important to remove the moisture source before repainting. The filler should be left slightly proud of the hole and then sanded back with fine paper to achieve a really smooth finish.

For example many caulks and paints have a limited range of working temperatures. A very good high bonding primer on all bare wood surfaces. Stir the paint to make sure all the colour pigments are properly mixed.

Sometimes best idea is to remove all layers of old paint using heat gun. One trick to exterior paint prep is learning to always keep one eye on the weather. If you are fixing your windows on the outside make sure that your filler is also suitable for exterior use.

If time is a factor you might want to wait until you have ample time to give all your windows. When painting over top older paint on wood for painting to last wood substrate must be solid sound and sturdy. After you need to prime all bare wood surface doesnt matter - water or.

Rain can shut down an exterior paint job but there are other aspects of the climate to consider as well. Although not always done the top internal and bottom faces of the window should be painted. Watch our useful tips from the professionals at Crown including what type of paint prim.

Then take off the blisters with a scraper and sand the surface smooth priming bare timber with a high quality primer before adding the top coats. For the best results when painting outside always start at the top and work. Simply apply the filler where necessary according to.