How To Prepare Outside Wood Trim For Painting

Use the high pressure carefully especially around windows.

How to prepare outside wood trim for painting. The goal is to remove the grime so you dont push it farther into the wood during sanding. There are only a few items required to prep wood trim for painting. Rinse thoroughly with a vinegarwater solution and let the trim dry.

Another key step preparing trim for paint is priming. Sanding and Cleaning the Wood Surface Download Article 1 Scrape off old paint or stain. To Summarize Prepping Exterior Trim For Paint Sanding filler caulking edges where trim meets another substrate allowing to dry.

Pressure wash to remove dirt Pressure washing removes loose paint and built-up grime and improves paint adhesion. Wash the Woodwork Youll need buckets sponges and detergent. But as they make it onto more and more.

Step 1 Begin your painting project by pouring thoroughly mixed paint into a bucket and dipping a quality 2-2½ wide nylonpolyester brush into the paint. Sanding and Scraping The real bulk of the work in exterior paint prep is surface prep. Avoid directing water up under the laps and keep the nozzle at least 16 in.

A putty knife to scrape peeling paint and apply fillers a paint scraper for rough oil-based paint. Use a stiff putty knife to scrape loose paint to the bare wood. Sure vinyl windows are a great low cost and low maintenance solution especially when installed on vinyl sided homes.

Step 4 Dust and Clean Windows Use a dry cloth to dust the trim panes and windowsill and then use a diluted soap concentrate and a small rag to clean the windows and. Dont wash with a cloth rag as it may shine a flat surface or dull a lustrous one. For larger surfaces like wood siding or a deck you can scrape the old paint or stain off using a wire brush or even a pressure washer.