How To Prepare Outside Wood For Painting

For larger structures a wire brush is an easy way to knock off the remaining pieces of paint and surface fibers while also roughing up the woods surface for better paint adhesion.

How to prepare outside wood for painting. Sand rust from nail heads then set and caulk the nail holes. Fill any holes and cracks in your exterior surface with a high quality exterior filler. Use a painting tray to remove excess paint from your roller.

Feather-sand the edges of sound well-adhered paint down to bare wood. With a scrubbing brush water and detergent scrub mildly. Another key step preparing trim for paint is priming.

Apply the paint in a consistent even manner. An aluminum wood primer is recommended when the wood is to be exposed to moisture. You need to lay the door flat on the floor support it with chairs or lay it on a sawhorse.

Scrape Loose Paint Caulk and Glazing Use a putty knife or multi-use paint scraper to remove flaking paint from the wood trim and loose glazing from the panes. Prime any bare or exposed areas on your homes exterior with an exterior-grade oil-based primer. Go ahead and use sandpaper to smoothen any sharp edges.

For previously painted surfaces start by removing any loose peeling paint already present. To Summarize Prepping Exterior Trim For Paint Sanding filler caulking edges where trim meets another substrate allowing to dry. A putty knife to scrape peeling paint and apply fillers a paint scraper for rough oil-based paint sandpaper or a sanding sponge to smooth out rough spots and dry spackling paste.

This type of primer will fill the wood pores and cavities in the wood. Follow these steps for a great finish. Flat putty knives or pull scrapers work well for this.