How To Prepare Exterior Woodwork For Painting

If the timber has different contours such as chamfered architrave or skirting wrapping the paper round a firm sponge will allow the paper to get into and onto the contours.

How to prepare exterior woodwork for painting. For exterior bare wood surfaces. And make sure to avoid these missteps. It helps prevent any dust particles from sticking to the walls and being painted over.

It may also require scraping stripping reglazing wire brushing filling and caulking. The most difficult part of that prep is sanding and scraping. Go over each area of the wood with your sandpaper to remove part of the top layer of paint but dont apply too much pressure as youll remove too much.

Then take off the blisters with a scraper and sand the surface smooth priming bare timber with a high quality primer before adding the top coats. Preparing Exterior Trim for Painting Step-by-Step. Sanding and Scraping The real bulk of the work in exterior paint prep is surface prep.

If your wood was painted before you need sand it down with fine-grain sandpaper to create a key for the new paint stick to. Cleaning washing off cracks crevices where siding overlaps each other tends to collect a considerable amount of dust debris. Cracking and flaking on multiple coats of paint.

So if you havent painted exterior within last six months it is recommended you need to wash exterior walls soffits fascia porch ceilings removing dust and debris before painting again. At the very least preparing exterior trim and siding for painting involves thoroughly cleaning lightly sanding and priming the surface. Its helpful to have the homeowner give the rooms to be painted a quick vacuum or sweep up before the painters get started.

How to Prep for Painting. Lightly sand the surface to improve the paints adhesion. Fill any cracks holes and open joins with an appropriate exterior filler.