How To Prep Wood After Sanding
Pound-in any protruding nail heads.
How to prep wood after sanding. How to clean wood for painting is a question many ask once the project is finished. It is a great tool for cleaning a large portion. Once the wood has been sanded it should have an even surface with non-jagged or rough edges it will take on a lighter color appearance and often the grains of the wood will show more.
Use a scraper to remove loose paint from the siding working from every direction. Allow the dampened wood to dry 30 minutes before the final sanding. Soak your hardware in a good cleaner.
If you plan on using an oil-based stain you must use the oil-based Minwax Pre-Stain Wood Conditioner. Using a primer will give your paint a better surface to stick to. It takes four steps to sand wood to perfection.
Optional pre-wetting of the wood when using waterbased finishes. Apply oil-based paint primer. While blowing the dust off with compressed air removes the dust it also mixes it into the air so some of it can settle back onto the surface and so you can breath it.
Using fine-grit wet and dry sandpaper to remove dust that stuck on the last coat. There are few steps to follow to ready the wood for painting once you are done with sanding. The primer also keeps any stains on the wood from coming through the paint.
If you still have paint or varnish remaining on your wooden project you can repeat the stripping process and again use mineral spirits and steel wool to. Once youre done sanding make sure youve gotten rid of ALL the sanding dust before you do anything else. While you can use any cloth to do this a tack cloth will pick.