How To Paint Wood Chipboard

Pour some of the paint into a paint tray.

How to paint wood chipboard. But sometimes you have to work with what you have. To paint the surface it is best to use acrylic dye. Chipboard also known as particleboard was not your first choice of flooring.

When you apply the first coat of paint apply it thinly and evenly. Fill any large gouges in the floor or the seams between the sheets of chipboard with wood filler. Start in the corner farthest from the door to avoid painting.

Never add thick coats of paint. If you need to apply more than one layer of paint to the particleboard paint thin layers and distribute the paint evenly across the surface to get the best results. Apply one coat of latex paint to the floor with a paint roller.

Use a small stain brush to apply the varnish to the plywood. Apply the primer with a brush around the edges then apply a thin coat to the rest of the floor with a roller. Smooth the wood filler flat with a putty knife and allow it to dry for 24 hours.

Then apply another layer of paint. First prepare the painting area by laying down large sheets of newspaper or a. Make sure the paint dries thoroughly before you add any additional layers of paint.

Next apply an oil-based primer with a brush or roller and wait 4 hours for it to dry. Roll off the excess on the shallow area of the. Want a cost effective way to give your kitchen a new lease of life.